• Call us:
  • +33 428 380 485
NXP LS2088A

NXP Layerscape LS2088A

Course Family:
NXP QorIQ Layerscape Processors
SKU/Ref:
NXP_LS2088

Course Objectives

This course aims to explain the architecture of the NXP LS288A SoC to enable participants to efficiently design a board and develop or adapt boot and I/O drivers. Attendees will get a detailed understanding of the internal architecture, especially the various paths between CPU, memory and peripherals. They will study the complex I/O peripherals including network accelerators.

General Information

Prerequisites

  • Experience with a 32-bit processor or DSP is mandatory
  • Note that the Cortex-A72 ARM CPU is covered by another course entitled ARM_A72

Duration & Attendance

  • From 5 to 6 days
  • Min/max number of participants: 3-15

Location

On site/intra

Target Audience

Engineers and technicians who develop boards and software based on LS2088A.

Program Overview

Day 1 Day 2 Day 3 Day 4 Day 5
OVERVIEW (1 hour) TRUST ARCHITECTURE (1 hour) QUAD SPI (1 hour) DPAA2 OVERVIEW (2 hours) WRIOP CLASSIFIER AND TABLE LOOKUP UNIT (WRIOP-CTLU) (2 hours)
INTERCONNECT (2 hours) POWER MANAGEMENT (1 hour) ENHANCED SECURE DIGITAL HOST CONTROLLER (1 hour) ETHERNET MACS (1 hour) PARSER (WRIOP-CTLU) (1 hour)
SYSTEM MMU, MMU500 (1 hour) DDR4 CONTROLLER (2 hours) SATA CONTROLLER (1 hour) QUEUE BUFFER MANAGER (2 hours) CTLU QOS MAPPING AND POLICER (2 hours)
HARDWARE IMPLEMENTATION (2 hours) INTEGRATED FLASH CONTROLLER (2 hours) ENHANCED DIRECT MEMORY ACCESS (eDMA) (1 hour) WIRE RATE IO PROCESSOR (2 hours) MULTI FIELD LOOKUP UNIT (MFLU) (1 hour)
CLOCKING AND RESET (1 hour) PCIE BRIDGE (1 hour) QUEUE DIRECT MEMORY ACCESS (qDMA) (1 hour)   L2 SWITCH ADDRESS RESOLUTION (1 hour)
    USB3 CONTROLLERS (1 hour)    
    LOW SPEED SERIAL INTERFACES (1/2 hour)    
    FLEXTIMER MODULE (1/2 hour)    

 

The detailed course program is available upon request. For on-site training, we can provide a customized program specifically tailored for your audience, needs, and schedule. Contact us to discuss this option.

Additional Information

Teaching Methods & Tools
Lectures with supporting slides, use of projector
Review and execution of bare-metal drivers, using GCC compiler and Lauterbach Trace32 debugger
Evaluation & Certification
Trainees are quizzed orally at the end of each chapter
Each trainee will fill out and return a training evaluation form upon completion of the training course
All attendees receive a Certificate of Completion upon completion of the training course.
Technical Material
Training manuals given to attendees during training in pdf format
Attendees should bring their laptops for local access to course material (presentation, datasheets, …)
Notepad and pen are provided

Complementary Products & Services

CPU Software Package (CSP) for the ARM® Cortex™-A72: implements exceptions, GIC, L1 cache, L2 cache, MMU paging and supports multicore in SMP or AMP mode.

SoC Software Package (SSP) for the NXP LS2088A: implements drivers for interrupt controller, memory controllers, uart and edma. This CSP/SSP is an ideal starting point for developing proprietary RTOS or bare-metal applications.

Optimized FFT: software implementation of a fixed point/floating point FFT using the NEON SIMD instruction set

Contact us to Learn More

Related Training Courses

Embedded MultiMediaCard v5.0
SATA 3.2